There is no one definitive answer to this question. Depending on the type of derby car, there may be a different location for the axles. For example, a track-based derby car typically has four axles in the front and two axles in the back. A road-based derby car typically has three axles in the front and one in the back.
There are a few ways to install Pinewood axles. You can use a self-tapping screwdriver to fasten the axle to the frame, or you can use a self-tapping bolt to secure the axle to the frame.
No, you do not glue pinewood derby axles.
There is no one definitive answer to this question. Some people recommend using a pinwheel tool to put the wheels on the car, while others prefer using a drill and saw. Ultimately, it comes down to personal preference.
There is no right or wrong answer to this question – it depends on the specific Pinewood Derby block you are interested in. However, some tips on how to make the best Pinewood Derby blocks include baking them for a shorter time (30-60 minutes), using a low temperature oven, and using a resistant baking sheet.
There is no definitive answer to this question as it depends on the track and the type of race. However, some experts feel that lighter Pinewood Derby cars can go faster than heavier ones.
There is no one definitive answer to this question. Some people recommend putting the weight on the front or back of the car, while others prefer to place it in the middle. Ultimately, it is up to the driver to decide how they want to balance the car and make it race safely.
There is no definitive answer to this question as the weight of a Pinewood Derby car will vary depending on the type of track and the particular vehicle. However, a general rule of thumb is to aim for a car that weighs between 2,000 and 2,500 pounds.
The fastest shape for a Pinewood Derby car is the G1. It is the most common shape used in Pinewood Derby cars.
The car must have a low center of gravity and be able to move quickly through the track.
There is no definitive answer to this question as the fastest pinewood derby car design may depend on the track, the cars, and the drivers. However, somepinewood derby car designs that have been popular include the Ford Mustang, Chevrolet Camaro SS, and Dodge Charger.
Yes, bent axles are legal in pinewood derby.
There is no one definitive answer to this question as the speed of a pinewood derby car depends on a variety of factors, including the weight and size of the car, the type of track used, and the drivers’ skill level. However, some tips on speeding up a pinewood derby car include using a lightening bolt to start the car, slowing down as you approach the finish line, and using strategic stops at intersections.
There is no one-size-fits-all answer to this question, as the best type of paint to use on a pinewood derby car will vary depending on the specific conditions and track layout of the race. However, some good options include white or black paint, weathering, and sandpaper.
There are a few ways to do it. One way is to use a weight that is the same weight as the car. Another way is to use a weight that is different than the car’s weight.
There is no definitive answer to this question as it depends on the type of pinewood derby car and the weight you choose. Some derby cars have weights on the bottom of them, while others do not.